450/750V 0,6/1kV
HD 22.4 / UNE 21027-4
Reference Norm


Power and flexibility to the limit.

Conductor: Electrolytic copper, class 5 or 6 (flexible), based on EN 60228

Insulation: Thermosetting rubber (type EI4).
The standard identification is the following:
1 x natural
2 x Brown + Blue
3 G Brown + Blue + Yellow/green
4 G Brown + Black + Grey + Yellow/green
5 G Brown + Black + Grey + Blue + Yellow/green

Outer sheath: Thermosetting rubber (type EM2). Black colour.

Applications: Thanks to its extraordinary flexibility and mechanical strength, the Xtrem H07RN-F cable is ideal for power transmission in both fixed instalation or mobile service. This cable has been manufactured using compounds which have much better behaviour than the ones specified in the standards. This fact makes the Xtrem H07RN-F cable a multipurpose one with higher service temperature than standard H07RN-F and also a 1kV voltage rating.

Rated voltage up to 1000 V possible thanks to the high dielectric properties of the insulation material (according to HD 516)

National norm / european: EN 60332-1

International norm: IEC 60332-1



Flexible conductor, class 5/6 Minimum service temperature: -25ºC Maximum service temperature: 90ºC
Maximum short-circuit temperature: 250ºC (max 5 s) Minimum bending radius: 4 x cable diameter Meter by meter marking
Flame non-propagation Impact resistance: AG2. Medium impact Outdoor installation: permanent
Water resistance: AD8 submerged Chemical & oil resistance: excellent Low temperature resistance: excellent (-25ºC)


Industrial use Industrial mobile use
Heavy mobile use Windmills
Robotics Open air